-
Retrofit flashings (also called a split flashing/or split boot) are used in applications where you cannot slide the flashing over / down a penetration. The retrofit flashing is split which allows you to wrap around the pipe penetration and seal. FASTENER
- $83.00
- $83.00
- Unit price
- per
-
MINI Black EPDM Square Based Flashing Boot is an ideal insulator and waterproofing flashing for TV antennas, lightning rods or conductors, small pipes and such. The flexible design of this pipe flashing meets all roofing needs. FEATURES: Flexible Base De
- $9.00
- $9.00
- Unit price
- per
-
Mini Residential Lead Master flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing.
- $74.00
- $74.00
- Unit price
- per
-
Mini Residential Lead Master flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing.
- $68.00
- $68.00
- Unit price
- per
-
Flexible Base Design - Sealing tightly with sealant and almost any type of fastener, the flexible base is virtually compatible with any roofing material -- metal, plastic, asphalt, tile, rubber membrane, and more. Uniform Plumbing Code / UPC Listed Maste
- $10.00
- $10.00
- Unit price
- per
-
FEATURES: ICC Listed & 35 Year Warranty: The ONLY ICC listed flashing for the metal building industry with a 35 year warranty. ICC-ES / IRD / IBC Listed. B-VENT Certified: Approved for use with Type-B vents. Flexible Base Design: Sealing tightly with s
- $11.00
- $11.00
- Unit price
- per
-
MAXI-S Master Flash Red Silicone Square-base Flashing is a 34 inch X 34 inch base, 9-1/4 inch high. It fits 12 inch to 28-1/2 inch OD pipes. FEATURES: High Temperature Silicone Materials For Hot Pipes, Chimney Pipes, Chemical Pipes, Extreme Environments
- $384.00
- $384.00
- Unit price
- per
-
Maxi-RFS Retrofit Multi-Flash Red Silicone Square-Base Flashing fits 13 inch to 27 inch OD Pipes. Standard Over-the-Top fits 12 inch to 28-1/2 inch OD Pipes. FEATURES: Silicone Material: Ideal for Hot Pipes, Chimney Pipes, Chemical Pipes, Extreme Environ
- $320.00
- $320.00
- Unit price
- per
-
MAXI-RF Multi-Flash, Retro-Style Black EPDM, Square-Base Pipe Flashing Boot with Stainless Closing Clip. Retro fits 13 inch to 27 inch OD pipes. APPLICATIONS: Retrofit flashings (also called a split flashing/or split boot) are used in applications where
- $180.00
- $180.00
- Unit price
- per
-
MAXI Master Flash Black EPDM Pipe Flashing Boot fits 12 to 28-1/2 inches pipes. The flexible design of this pipe flashing meets all roofing needs. Provides a permanent seal that controls gaseous or liquid environments to eliminate leakage and odor contami
- $145.00
- $145.00
- Unit price
- per
-
FEATURES: Made of EPDM, this flashing is designed for maximum resistance to all weather conditions The base is designed to fit virtually all panel configurations and roof pitches regardless Of pipe location On site customization Ozone and UV protected Des
- $225.00
- $225.00
- Unit price
- per
-
Flexible Base Design - Sealing tightly with sealant and almost any type of fastener, the flexible base is virtually compatible with any roofing material -- metal, plastic, asphalt, tile, rubber membrane, and more. Uniform Plumbing Code / UPC Listed Maste
- $165.00
- $165.00
- Unit price
- per
-
Designed to easily seal 12" size rotating ventilators on metal roof tops. Installs over the top of vent pipe. Resilient Design Master Flash performance is unaffected by: ﾕ Ice/snow ﾕ Hail stones ﾕ Vibration ﾕ Expansion/Contraction Environment Co
- $114.00
- $114.00
- Unit price
- per
-
Low profile Master Flash pipe flashing for wall pipes, wires, interior finishing and more. Effectively penetrations from water and insects. Design accommodates 0 to 4 inch OD pipes. EPDB is flame retarded. White Silicone option meets FDA grades for food p
- $15.00
- $15.00
- Unit price
- per
-
Universal flashing. Seals irregular profiles, large items, curved surfaces etc. Durable and UV/Ozone resistant Gray EPDM Rubber. Aluminum reinforced edges for secure attachment. APPLICATIONS: Gutter Liners Large Pipes Square Structures RV Cab to Roof Ro
- $25.00
- $25.00
- Unit price
- per
-
Universal flashing. Seals irregular profiles, large items, curved surfaces etc. Durable and UV/Ozone resistant Gray EPDM Rubber. Aluminum reinforced edges for secure attachment. APPLICATIONS: Gutter Liners Large Pipes Square Structures RV Cab to Roof Ro
- $66.00
- $66.00
- Unit price
- per
-
APPLICATIONS: Marine, saltwater or anywhere corrosive or where 316 stainless is needed. Sealing and flashing; metal roofing and siding applications etc. Fits tightly to 7/8" fasteners, screws etc. MATERIALS/CONSTRUCTION: ASTM grade 20-Gauge (~0.040") 31
- $1,363.00
- $1,363.00
- Unit price
- per
-
EPDM bonded 20 gauge Galvanized Steel flashing and termination washers for use with 7/8" Fasteners, or Screws etc. OPTIONS: Backing materials: galvanized steel, high tensile aluminum, 304 stainless and 316 stainless steel. Facing (sealing) materials: neo
- $128.00
- $128.00
- Unit price
- per
-
MATERIALS: ASTM A-527 20 Gauge Hot Dip Galvanized Steel; Black EPDM Rubber, 70 durometer hardness per ASTM D2000; Overall thickness .130" before compression; Available compression about 0.030"; EPDM thickness about 0.065". OPTIONS: Also available with b
- $100.00
- $100.00
- Unit price
- per
-
ASTM A-527 20 Gauge Hot Dip Galvanized Steel; Black EPDM Rubber, 70 durometer hardness per ASTM D2000; Overall thickness .130" before compression; Available compression about 0.030"; EPDM thickness about 0.065". OPTIONS: Also available with backing mater
- $201.00
- $201.00
- Unit price
- per
Recently Viewed Products
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
- Choosing a selection results in a full page refresh.