-
A Simple solution to flashing a penetration through a residential roof that requires a wrap-around installation. Wraps easily around existing or hard to reach penetrations. It offers a built-in 20ï¾° pitch for slanted roofs. It is marked with dimension
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for residential roof applications. Available in black EPDM Rubber or High Temp Red Silicone which are both resistant to ultraviolet
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for clay tile roofs. No Fasteners required Available in Terra Cotta, Black EPDM Rubber or High Temp Red Silicone which are both res
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for residential roof applications. Available in black EPDM Rubber or High Temp Red Silicone which are both resistant to ultraviolet
- $1.00
- $1.00
- Unit price
- per
-
Vendor: Aztec WasherRESIDENTIAL MASTER FLASHA ﾓC20ﾔ ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available. The addition of fire retarding agents milled directly into the rubber compound creates a self-extinguishing feature
- $1.00
- $1.00
- Unit price
- per
-
Vendor: Aztec WasherRES-LEAD MASTER FLASHThe built-in 20ï¾° pitch allows adaptability to almost any roof pitch including 45ï¾° The pull tab design and easy smooth tear grooving is intended to eliminate razor knives and allow for a circular hole Easily used on Shingles, Tiles and other residentia
- $1.00
- $1.00
- Unit price
- per
-
Use on: EPDM, TPO, Hypalon, AgedPVC, Modifies, and All Metals. For use on virtually all metal roofs, Itï¾’s a one-step permanent repair system for virtually all roof types and roof accessories. It creates a waterproof, moisture, and airtight barrier w
- $1.00
- $1.00
- Unit price
- per
-
Standing seam roof end cap flashing Available in Light Gray, Dark Gray, and BlackEPDM Rubber Applications: Skylights ﾕ Metal Curbs ﾕ Ridge Applications ﾕ Job Site RetrofitBase 3 sizes (Mini, #1, #2) Height Range: ﾾﾔ to 3-1/4ﾔ (19 to 82mm)
- $1.00
- $1.00
- Unit price
- per
-
A Simple solution to flashing a penetration through a residential roof that requires a wrap-around installation. Wraps easily around existing or hard to reach penetrations. It offers a built-in 20ï¾° pitch for slanted roofs. It is marked with dimension
- $1.00
- $1.00
- Unit price
- per
-
The Standard Retrofit Master Flashï¾® is designed to seal existing pipes/vents where a standard pullover flashing cannot be assembled. A simple solution to flashing a penetration through a metal roof that requires a wrap-around existing or hard to reach
- $1.00
- $1.00
- Unit price
- per
-
Vendor: Aztec WasherUNIVERSAL MASTER FLASHAll Around Design Excellence, This universal flashing has been designed to fit virtually all panel configurations. Sleeveflexibility absorbs vibration and pipe movement caused by expansion/contraction. Easy on-site customization can accommodate all nor
- $1.00
- $1.00
- Unit price
- per
-
The Standard Retrofit Master Flashï¾®is designed to seal existing pipes/vents where a standard pullover flashing cannot be assembled. A simple solution to flashing a penetration through a metal roof that requires a wrap-around existing or hard to reach
- $1.00
- $1.00
- Unit price
- per
-
Vendor: Aztec WasherSTANDARD MASTER FLASH15 sizes (Mini, #1, #2, #3, #4, #5, #6, #7, #8, #8-C, 9, #9X, Maxi-C, Maxi-O, Maxi XL) Fits: Closed Top to 39-1/2ï¾” (0 to 1meter) Pipes Base Range: 2-1/4ï¾” (57mm) to44ï¾” (1.1meter) Weather Protection Made of EPDM orHigh Temp Red or Gray Silicone,...
- $1.00
- $1.00
- Unit price
- per
-
Design Excellence Specially designed for square vent retrofit applications, sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. A simple solution to flashing a penetration through a metal roof that requires a wra
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for clay tile roofs. Available in black or Gray EPDM Rubber or High Temp Red or Gray Silicone which are both resistant to ultraviol
- $1.00
- $1.00
- Unit price
- per
-
TwoFlashings in One Can be used as both a Standard flashing or a Retrofit flashing Standard Fits: Closed Top to 2ï¾–3/4ï¾” (0 to 70mm) Pipes Retrofit Fits:1-1/4ï¾” to2-1/4ï¾” (25 to 57mm) Pipes Base:4-1/2ï¾” (114mm) Ports: 1/64ï¾” to 3/8ï¾” (1to 9mm)
- $1.00
- $1.00
- Unit price
- per
-
Design Excellence Specially designed for square vent applications, sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. TwoFlashings in One Can be used as both a Standard flashing or a Retrofit flashing 3 sizes(
- $1.00
- $1.00
- Unit price
- per
-
TwoFlashings in One Can be used as both a Standard flashing or a Retrofit flashing 9 sizes(#2, #3, #4, #5, #6, #7, #8, #9, Maxi) Standard Fits:5/8ï¾” to 28-1/2ï¾” (15 to723mm) Pipes Retrofit Fits:1-1/8ï¾” to 28ï¾” (28 to 711mm) Pipes Base Range: 6ï¾”
- $1.00
- $1.00
- Unit price
- per
-
Designed for Small pipes/wires, solar, electrical applications ﾕ Weather Protection Made of Black or Gray EPDM Rubber or High Temp Gray Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultravio
- $1.00
- $1.00
- Unit price
- per
-
Center Port:Closed Top to 2-3/8ï¾” (0 to 60mm) Pipes/wires SmallPort: 1/64? to 3/8? (1 to 9mm) Base size: 3-3/4ï¾” (95mm) Weather Protection Made of Black or Gray EPDM Rubber or High Temp Gray Silicone, these flashings are compounded specifically for ma
- $1.00
- $1.00
- Unit price
- per
Recently Viewed Products
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
- Choosing a selection results in a full page refresh.