-
Use on: EPDM, TPO, Hypalon, AgedPVC, Modifies, and All Metals. For use on virtually all metal roofs, Itï¾’s a one-step permanent repair system for virtually all roof types and roof accessories. It creates a waterproof, moisture, and airtight barrier w
- $1.00
- $1.00
- Unit price
- per
-
Closed or Open TopAvailable Open Top Fits:6-3/4ï¾” to15-1/2ï¾” (171 to 393mm) Pipes Closed Top Fits:Closedto 15-1/2ï¾” (0 to 393mm) Pipes Base: 19-1/2ï¾” (495mm) Made of black or Gray EPDM Rubber or High Temp Red Silicone, these ?ashings are compounded
- $1.00
- $1.00
- Unit price
- per
-
The Extreme Angle Master Flashï¾® Pipe Boot Flashing is specifically designed for application to a metal roof with a 35ï¾° to 65ï¾° angle while still coping with commonly encountered pipe penetrations. 2sizes (#1, #2) Fits:ClosedTop to 8ï¾” (0 to 203
- $1.00
- $1.00
- Unit price
- per
-
Vendor: Aztec Washer35 YEAR MASTER FLASHTheFirst ICC flashing of its kind, listed with the Florida and California Building codesﾮ. Compliance with the following codes: INTERNATIONAL BUILDING CODEﾮ (IBC) INTERNATIONAL RESIDENTIAL CODEﾮ (IRC)CALIFORNIA BUILDING CODEﾮ (CBC ﾕ CALIFOR
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for clay tile roofs. Available in black or Gray EPDM Rubber or High Temp Red or Gray Silicone which are both resistant to ultraviol
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for residential roof applications. Available in black EPDM Rubber or High Temp Red Silicone which are both resistant to ultraviolet
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for clay tile roofs. No Fasteners required Available in Terra Cotta, Black EPDM Rubber or High Temp Red Silicone which are both res
- $1.00
- $1.00
- Unit price
- per
-
Four ports for cables or wires per flashing to accommodate copper pipe and electrical cabling A simple solution designed for residential roof applications. Available in black EPDM Rubber or High Temp Red Silicone which are both resistant to ultraviolet
- $1.00
- $1.00
- Unit price
- per
-
TwoFlashings in One Can be used as both a Standard flashing or a Retrofit flashing Standard Fits: Closed Top to 2ï¾–3/4ï¾” (0 to 70mm) Pipes Retrofit Fits:1-1/4ï¾” to2-1/4ï¾” (25 to 57mm) Pipes Base:4-1/2ï¾” (114mm) Ports: 1/64ï¾” to 3/8ï¾” (1to 9mm)
- $1.00
- $1.00
- Unit price
- per
-
US Patent #10,161,135,B2 Applications: Turbine Vents Roof Exhaust Fans ﾕ Metal Roof Vents ﾕ Roof Caps ﾕ Goose Neck Air Vent Specifically Designed for Roof Vents with a Pre-Installed Metal Base Square or Rectangle: Closed Top to 12ﾔ (0 to 355mm)
- $1.00
- $1.00
- Unit price
- per
-
US Patent #10,161,135,B2 Applications: Turbine Vents Roof Exhaust Fans ﾕ Metal Roof Vents ﾕ Roof Caps ﾕ Goose Neck Air Vent Specifically Designed for Roof Vents with a Pre-Installed Metal Base Opening: 11-3/4ﾔ X 11-3/4ﾔ (298 X 298mm) Overall he
- $1.00
- $1.00
- Unit price
- per
-
Designed for Small pipes/wires, solar, electrical applications ﾕ Weather Protection Made of Black or Gray EPDM Rubber or High Temp Gray Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultravio
- $1.00
- $1.00
- Unit price
- per
-
Center Port:Closed Top to 2-3/8ï¾” (0 to 60mm) Pipes/wires SmallPort: 1/64? to 3/8? (1 to 9mm) Base size: 3-3/4ï¾” (95mm) Weather Protection Made of Black or Gray EPDM Rubber or High Temp Gray Silicone, these flashings are compounded specifically for ma
- $1.00
- $1.00
- Unit price
- per
-
Use on: EPDM, TPO, Hypalon, AgedPVC, Modifies, and All Metals. For use on virtually all metal roofs, Itï¾’s a one-step permanent repair system for virtually all roof types and roof accessories. It creates a waterproof, moisture, and airtight barrier w
- $1.00
- $1.00
- Unit price
- per
-
Specifically Designed for Sidewall or Low-Profile Applications Applications: ﾕ Drywall ﾕ Sidewall Applications ﾕ Stucco Walls ﾕ Corrugated Metal Sides ﾕ Roof Penetrations 3 sizes(#1, #2, #3) Standard Fits: Closed Top to 12-1/2ﾔ (0 to
- $1.00
- $1.00
- Unit price
- per
-
Vendor: Aztec WasherLOW PROFILE MASTER FLASHSpecifically Designed for Sidewall or Low-Profile Applications Applications: ﾕ Drywall ﾕ Sidewall Applications ﾕ Stucco Walls ﾕ Corrugated Metal Sides ﾕ Roof Penetrations 3 sizes(#1, #2, #3) Fits: Closed Top to 12-1/2ﾔ (0 to 318mm) Pip
- $1.00
- $1.00
- Unit price
- per
-
Closed or Open TopAvailable Open Top Fits:6-3/4" to15-1/2" (171 to 393mm) Pipes Closed Top Fits:Closedto 15-1/2" (0 to 393mm) Pipes Base: 19-1/2" (495mm) Made of black or Gray EPDM Rubber or High Temp Red Silicone, these ?ashings are compounded speci?
- $1.00
- $1.00
- Unit price
- per
-
Standing seam roof end cap flashing Available in Light Gray, Dark Gray, and BlackEPDM Rubber Applications: ﾕ Skylights ﾕ Metal Curbs ﾕ Ridge Applications ﾕ Job Site RetrofitBase 3 sizes (Mini, #1, #2) Height Range: ﾾ" to 3-1/4" (19 to 8
- $1.00
- $1.00
- Unit price
- per
-
9", 12" and 18" wide gray EPDM linear flashing with flexible metal sides. Available in 12', 33', and 50' lengths Applications: ﾕ Transition walls ﾕ Stepped roofs ﾕ Metal corrugated roofs ﾕ Parapet walls ﾕ Expansion Joint ﾕ Roof Penet
- $1.00
- $1.00
- Unit price
- per
-
Effectively seals pipe penetrations on shingle roofs. A high-grade EPDM rubber collar is molded into a nail-able aluminum base for integration into the shingle roofing system. FEATURES: Heavy duty black EPDM seal is ASTM C20 UV resistant and allows a 20
- $18.00
- $18.00
- Unit price
- per
Recently Viewed Products
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
TMR
- Choosing a selection results in a full page refresh.