Malco

Malco FBSN-2 2-1/2" Staples for FBSN Gun 200 Pk Features: Extra Sharp "Dual-Barbed" staples Staples increase "Bite" and holding power to secure 3/8"

About Malco FCC3 Fiber Cement Hand Nibbler Shears features: Trim cuts and rounded cuts. Anti-slip blade profile. Cuts produce minimal dust exposure.

Malco FCC4 Fiber Cement Siding Guillotine Shear features: Cleanly cuts 5/16ﾔ (8 mm) fiber cement siding without distortion or compression. A large, stable support plate, with board stop, ensures straight, square cuts in 8-1/4" (210 mm) wide plank with minimal dust. No sharpening required!...

Malco FCC7 Fiber Cement Angle Cutter Features Nickel plated blade design with high leverage handle requires less force to produce clean cuts with minimal air-borne dust. Scribe desired angle on fiber cement siding plank and feed it into the guillotine blade as you cut....

Malco FCCB10 10" x 6 Tooth Fiber Cement Saw Blade PCD Faced Carbide Tips 10" Diameter Used to do repetitive cuts in fiber cement Malco FCCB10 Specifications Diameter: 10 in (254.0 mm) Teeth: 6

Malco FCCB12 12" x 8 Tooth Fiber Cement Saw Blade PCD Faced Carbide Tips 12" Diameter Used to do repetitive cuts in fiber cement Malco FCCB12 Specifications Diameter: 12 in (304.8 mm) Teeth: 8

Malco FCCB7 7 1/4" x 4 Tooth Fiber Cement Saw Blade PCD Faced Carbide Tips 7-1/4" Diameter Used to do repetitive cuts in fiber cement Malco FCCB7 Specifications Diameter: 7 1/4 in (184.2 mm) Teeth: 4

Using the Malco Products Facing Gauge FCFG while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The Facing Gauge may also be used in combination with the Malco Overlap Gauge to prop up one...

Malco FCG2 Overlap Gauges (Cement Siding Tool) Strong, one-piece tempered spring steel construction. Precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will nor mar finish of pre-painted siding.

Malco FCMS Fiber Cement Siding Mixed Gauge Installation Kit Malco FCMS Siding Facing Gauge Used on fiber cement planks while working across the width of the plank to assure greater accuracy of the desired exposure and guards against sagging Adjustable for precise 5"

Malco FCN Fiber Cement Siding Notcher Designed for Fiber Cement Siding The Notcher will score and cut arcs up to 4" (10.16 cm) diameter Allows for plumbing

Malco FCP1 Multi-purpose Fencing Pliers features: Combination hammer, wire tensioner, staple remover, wire cutter and splicer. Hammer face. Claw to remove staples. Two built-in wire cutters. All steel body. Vinyl cushion grips.

Malco FCS Fiber Cement Siding Hand Snip ARC CUTTING POSITION- Capable of cutting 2-inch (50.8 mm) circle. STRAIGHT CUTTING POSITION- Capable of trimming 1/8-in. (3.175 mm) from edge of 5/16-in. (7.938 mm) siding plank. Malco FCS Specifications Arc Position Capacity: 2-inch (50.8 mm) Straight...

Malco FDC1 Flex Duct Cutter Built-in wire cutter Double edged blade Cuts from either direction Fine honed blade Malco FDC1 Specifications Length in.(mm)-11-7/8 (302) Net Weight oz.(g)-11 (312)

Malco FDC2 Flex Duct Shear Thumb Operated Latch Smooth Scissor Action Heavy Duty Wire Cutter Malco FDC2 Specifications Length of Cut in.(mm)4-3/8 (111) Length in.(mm)12-1/4 (311) Net Weight oz.(g)13 (369)

Malco FG1 Fiberglass Duct Hole Cutter Makes precise holes in ductboard for flex duct take-offs. Supplied with standard double point utility knife blade for cutting 1 inch (25.4 mm) board. USE SPECIAL No. KBHC BLADE FOR 1-1/2 (38.1 mm) INCH DUCTBOARD. Cuts 4" to...

Malco FGK Duct Knife Features a rounded scoring edge to cut fiberglass without tearing skin Safer to use with comfortable molded handles Malco FGK Duct Knife Specifications Handle Color: Black Application Size: 1" - 1 1/2" Shipping Weight: 0.38 lbs.

Malco FP1 8 in. Fencing Pliers Features: Malco's combination 8" fencing pliers were made with the professional in mind. The pliers feature three separate jaw areas for gripping

Malco FP2 10 in. Fencing Pliers Features: Malco's combination 10" fencing pliers were made with the professional in mind. The pliers feature three separate jaw areas for gripping

Malco FTC1 Fence Tensioning Claws Features: Claws hold fencing in position while attaching wire to posts. Malco FTC1 Specifications: Tool Length: 9-1/2 Inches For easy one-person installation of chain link fencing Set of 2 universal chain link fencing tensioners accommodates T-section or round posts...