Malco C5A2 Crimping Tool for Sheet Metal - TurboCrimper IMPACT

Malco C5A2 TurboCrimper IMPACT features:

The IMPACT is a simple, compact accessory that works with your corded or cordless impact driver to quickly and safely crimp 30 to 24 gauge (0.41 to o.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe.
With the pipe or duct seam in a closed position, start the crimp to one side of the seam by gently tugging on the driver trigger and angling the TurboCrimper IMPACT onto the metal edge.
Walk the crimper around the pipe circumference in a controlled manner and then angle the crimper off the metal as the crimper approaches the other side of the seam.
The TurboCrimper IMPACT is five times faster than a manual crimping tool based on actual field trials! It is comfortable for an operator to maneuver and, take note, whatever your dominant hand it works with the impact driver in forward or reverse.
The handy little TurboCrimper IMPACT is a should-have accessory for every HVAC installer and easily stores in a ready tool pouch. Like you would with any of your good tools, take care of it.
Attention: Use Impact Driver Only! Corded or Cordless. (Min.12 Volt DC / Max. 7 Amp AC)

When you use this device, there is no set-up, no adjustments. Pop the TuboCrimper in your 1/4-in. impact driver and begin crimping multiple sizes, types, and thickness of pipe and duct, including spiral duct. Time is money - fact. Check the video we've provided.

Malco C5A2 TurboCrimper IMPACT specifications:

Manufacturer: Malco Tools
Model No.: C5A2
Category: Malco Duct Tools
Type: Malco Metal Duct Tools & Accessories
Impact Driver Requirements: Min 12V DC, Max 7A AC
Chuck Requirements: 1/4 Hex, Quick Release
Capacity in Galvanized Steel ga(mm): 30-24 (0.41-0.71)
Capacity in Cold Rolled Steel ga(mm): 30-24 (0.31-0.61)
Replacement Drive Shaft: Order C5A2RD EV
Shipping Weight: 2 lbs.

Malco C5A2 TurboCrimper IMPACT Includes:

(1) TurboCrimper IMPACT